Could you watch TopUp TV on a PC with DigiTV?
Yes, from 2005, for as long as TopUp TV used SECA 2 encryption. From v3.5 onwards the DigiTV software could decrypt TopUp TV’s SECA 2 channels when you connected a Phoenix-interface smartcard reader and inserted a valid, paid-up TopUp TV card.
Wikipedia dates the end of TopUp TV broadcasting to 31 October 2013, so there is nothing left to decrypt. This guide covers how the PC route worked, what the archived Nebula Electronics Ltd pages say about it, and what you use today for pay TV on a computer.
Nebula Electronics Ltd was the UK company that made DigiTV. Every claim about its software below comes from its old pages as saved by the Internet Archive, and each one links to the capture it was read from.
What was TopUp TV?
TopUp TV was a pay-TV service on UK digital terrestrial television, launched in March 2004 according to Wikipedia’s Top Up TV article. It sold encrypted channels to Freeview households, which meant you needed a box, recorder or television with a card slot and a viewing card.
At launch the line-up was ten time-shared channels, including UKTV Gold, UKTV Style, UKTV Food, Discovery, TCM, Bloomberg and Cartoon Network.
The same article says the boxes available at launch were ex-ITV Digital boxes, and Nebula’s own page agrees: the old ITV and On-Digital boxes were “the only devices” able to decode the new channels.
That gap is where DigiTV came in. A PC with a DigiTV tuner could receive the same transmissions, so the only missing piece was decryption.
How did DigiTV decrypt TopUp TV?
The TopUp TV support page captured in December 2007 describes two phases. Phase 1, marked complete, was software support for the SECA 2 system using a “standard Phoenix interface smartcard reader (NOT a programmer)” and a valid TopUp TV card.
Phase 2 was a smartcard reader made by Nebula, housed in a case to match the DigiTV units. The page still described it as a plan in December 2007. I found no archived page confirming it ever shipped.
The software side moved in steps, and the DigiTV version history has the full timeline:
- v3.2, dated March 2005 on the downloads page, added “Phase 1 beta support for the decryption of pay TV channels eg. TopUp TV”.
- v3.5.09 added “our own implementation of a SECA2 CAM emulator”, so third-party MultiDEC plugins were no longer required, and let you record TopUp TV channels like unencrypted ones, including several at once.
- The setup page captured in April 2007 tells you to install v3.5.20 or later.
The December 2007 support page carries a warning worth repeating. Access depends on “a valid, and paid-up TopUpTV smartcard”, and the page says the software is “NOT a means of accessing these channels for free”.
How did you set up TopUp TV in DigiTV?
The setup page captured in April 2007 gives seven steps. You install v3.5.20 or later, install the card reader and note which COM port its driver assigned, and insert your card.
You then right-click the DigiTV window, open Settings, go to the Conditional Access page and enter the COM port. Next you pick the “In-built DigiTV CAM” option, where your card details should appear, and change to a TopUp TV channel.
The page says a COM port device, or a USB device that emulates one, “should suffice”. A reader that does not appear as a COM port was outside what Nebula described.
The Conditional Access tab sits in the application’s settings, and the rest of that dialog is covered in the DigiTV software guide.
When did TopUp TV close?
Wikipedia dates the end of broadcasting to 31 October 2013. It reports that customers on the TV Favourites and PictureBox packs received letters in September 2013 giving that date, and that the company’s website carried a notice on 31 October saying it had ceased broadcasting.
I opened the notice itself. The topuptv.com home page captured on 5 November 2013 is a banner image reading “TOP UP TV HAS CEASED BROADCASTING” and “Thank you to all our loyal subscribers for your support over the years”, and Wikipedia adds that the company sold its subscriber business to Sky.
The 31 October date is Wikipedia’s, because the banner carries no date of its own.
The decline began earlier. Wikipedia says the sports channels went first, with Sky Sports 1 and 2 removed on 1 July 2013 and ESPN on 1 August 2013.
It also says the 2006 on-demand relaunch, Top Up TV Anytime, required a dedicated recorder, and that the live channels’ hours were cut back as viewing moved to on demand until they closed.
Did DigiTV stop working with TopUp TV before the closure?
Probably, though I cannot prove it. Wikipedia states that TopUp TV switched from MediaGuard SECA2 to Nagravision Merlin encryption “since a card swap in 2008”, which would have ended any SECA 2 route.
Nebula’s pages never mention the change. The footer of the downloads page captured in February 2009 still read “TopupTV compatible Digital TV decoder”, and the March 2009 home page still linked a “TopUP TV support” item.
Treat that as a marketing line rather than evidence of function. I found no page, from Nebula or anyone else, that says when DigiTV last decoded TopUp TV in practice.
Old support pages can also lag reality. The April 2007 setup page still listed E4 among the TopUp TV channels, which Wikipedia says left the platform in May 2005 to become free-to-air.
What do you use for pay TV on a PC today?
Streaming apps do the job now. Freeview’s device page says you watch live TV on a PC through the play symbols in its TV guide and the broadcasters’ players, and its list of paid apps names BritBox, Netflix, NOW and Prime Video.
For a broadcast route, the closest successor to the TopUp TV card slot is the Common Interface module. Wikipedia says CI+ modules were meant to settle Sky’s security concerns, and the first compatible devices appeared in October 2011.
On a PC, the DVBViewer site states that pay TV playback and recording works “for DVB cards/adapters with integrated CAM and valid subscription”. That covers tuners with a module slot only, and I could not verify that any current UK pay service can be decoded this way on Windows 11.
My view: for a UK reader in 2026, the card-reader route is a historical curiosity. If you want pay channels on a PC, use the provider’s app, and keep the aerial and tuner for free Freeview. The tuner and software walkthrough is in the guide to watching Freeview on a PC.
Whatever you watch live, a TV licence applies. Freeview’s licence page says everyone who watches broadcast TV in the UK needs one, whatever TV service they use.
The DigiTV hardware from this era is described in the DigiTV tuner guide, and the driver situation in the DigiTV driver guide.
TopUp TV questions
Can you still watch TopUp TV?
No. Wikipedia dates the end of broadcasting to 31 October 2013, and the company’s own banner, archived on 5 November 2013, says it ceased broadcasting. Wikipedia also says TopUp TV told customers the hardware would carry on working as a Freeview decoder.
What smartcard reader did DigiTV use for TopUp TV?
The archived setup page calls for a reader supporting the Phoenix interface, either a COM port device or a USB device that emulates a COM port. Nebula also described its own reader as a planned second phase.
Which DigiTV version added TopUp TV support?
Phase 1 beta decryption appears in the v3.2 notes, dated March 2005 on the downloads page. The built-in SECA 2 emulator arrived in v3.5.09, and the setup page asks for v3.5.20 or later.
Could you watch TopUp TV for free with DigiTV?
No. The support page says the software gave access only with a valid and paid-up TopUp TV smartcard, and calls it “NOT a means of accessing these channels for free”.
Why did TopUp TV close?
Wikipedia ties the end to the loss of its sports channels in mid-2013, after BT Sport’s takeover of ESPN and the removal of Sky Sports 1 and 2 from the terrestrial platform. The company’s own page offers no reason, only thanks to subscribers.

Dean Prust was a reporter for Nebula Electronics, before becoming the lead editor. Dean has over fifty bylines and has reported on countless stories concerning all things related to technology. Dean studied at Caltech.



